15. September 2020 | Press Release

Decisive progress in multi-junction solar cells

Record efficiency of highly efficient III-V multi-junction solar cells on silicon / High energy efficiency at attractive cost

Herzogenrath, Germany, September 15, 2020 – A central stage in the development of economic solutions for the industrial use of multi-junction solar cells for power generation has been reached. For the first time, an efficiency of 25.9 percent has been achieved with a multi-junction solar cell grown directly on a silicon substrate.

This record figure was achieved by researchers at the Fraunhofer Institute for Solar Energy Systems ISE in close cooperation with the Technical University of Ilmenau, the Philipps University of Marburg and the epitaxy experts at AIXTRON SE, a leading provider of deposition equipment for the semiconductor industry, as part of the funded "MehrSi" project. The team, together with scientists from the Fraunhofer ISE, succeeded in optimizing the layer structure and technology.

Key technology tandem photovoltaics 

"For the first time we have now been able to realize a tandem solar cell based on a silicon wafer with such high efficiency," comments Dietmar Schmitz, Vice President Corporate Technology Transfer at AIXTRON SE. Until now, the production of III-V multi-junction solar cells has been based on a more expensive substrate material, for example also a compound semiconductor material.

Dietmar Schmitz emphasizes what is special about this basic research: "The gallium and phosphorus atoms must occupy the correct lattice positions at the interface with silicon. To achieve this, we have to control the atomic structure very well. This requires exceptionally high precision. In addition, to achieve the necessary high quality of the epi-wafers, it is crucial that a high crystal quality of all layers is achieved during epitaxial growth. This was achieved in the project thanks to the improved system technology developed by AIXTRON and the good cooperation with the project partners".   

Low price – High cost attractiveness of silicon wafers

In this so-called tandem photovoltaics, different combinations of high-performance solar cell materials are arranged in layers on top of each other in order to use the different wavelengths of sunlight more efficiently when converting light into electrical energy. Silicon is suitable for absorbing the infrared portion of the sunlight spectrum. Layers of different III-V semiconductor compounds, a few micrometers thick, are then applied to the silicon base to convert the ultraviolet, visible and near-infrared light more efficiently into electricity. Tandem photovoltaics is a key technology for the energy transition. Due to the silicon used, the multi-junction solar cells grown on a silicon substrate are more cost-effective than solar cells based on other substrates.

Work on faster crystal growth to further reduce manufacturing costs

From the technological basis that has now been achieved, the alliance partners are working at high pressure to further increase efficiency and reduce manufacturing costs. To this end, the deposition of the layers is to be realized even faster, with higher throughput and thus more cost-optimized. In addition, the efficiency of the solar cells is to be further improved.

"Specifically, the dislocation density in the III-V solar cell layers is to be reduced from 108 cm-2 to the range of 1-5*106 cm-2 in order to increase the efficiencies to more than 30 percent. And last but not least, the cost-effectiveness of the epitaxy processes is to be further optimized," explains Prof. Dr. Michael Heuken, Vice President Corporate Research and Development at AIXTRON SE.

By means of more cost-effective processes in combination with silicon as the lowest sub-cell, tandem technology is to be made accessible for broad-based photovoltaics in the future. AIXTRON has already been working on such III-V multi-junction solar cells on silicon with several partners for many years.

The project "SiTaSol" for the joint development of layer packages that can be produced as quickly and cheaply as possible is funded by the EU. In "SiTaSol" AIXTRON has built and tested a specially optimized Metal Organic Chemical Vapor Phase Epitaxy (MOVPE) system in its own laboratory.

Further information about tandem photovoltaics at www.ise.fraunhofer.de/en.html

To download a photo (Several III-V tandem solar cells on a silicon substrate with 10 cm diameter © Fraunhofer ISE /Photo: Markus Feifel) please click here.

The project "SiTaSol" is funded by the EU (funding number: 727497) and the project "MehrSi" by the Federal Ministry of Education and Research BMBF (funding number: 03SF0525D).

Download press release 561.2 KB

Our registered trademarks: AIXACT®, AIXTRON®, Atomic Level Solutions®, Close Coupled Showerhead®, CRIUS®, EXP®, EPISON®, Gas Foil Rotation®, Optacap™, OVPD®, Planetary Reactor®, PVPD®, STExS®, Trijet®

Sales

Alan Tai
Taiwan/Singapore

Phone: +886 3 571 2678 ext. 101

Christof Sommerhalter
USA

Phone: +1 669-228 ext. 3893

Frank Schulte
Europe

Phone: +49 (2407) 9030 -768

Hisatoshi Hagiwara
Japan

Phone: +81 3-5781-0935 ext. 510

Nam Kyu Lee
South Korea

Phone: +82 31 371 ext. 3011

Wei (William) Song
China

Phone: +86 2164453226 ext. 101

Products

Dr. Jens Voigt
Director Product Management

Phone: +49 (0) 2407 9030-9022

Service

AIXTRON SE (Headquarters)

Phone: +49 (2407) 9030-0

AIXTRON SE (R&D Center)

Phone: +49 (2407) 9030-222

AIXTRON 24/7 Technical Support Line

Phone: +49 (2407) 9030-999

AIXTRON K.K. (Japan)

Phone: +81 3 5781 0931

AIXTRON Korea Co., Ltd.

Phone: +82 (31) 371-3000

AIXTRON Taiwan Co., Ltd. (Main Office)

Phone: +886 3 571 2678

AIXTRON Inc. (USA)

Phone: +1 (669) 228-3759

Spare parts

Herr Satoshi Fujii
Spare part

Phone: +81 3 5781 0932

Herr Brian Chuang
Spare part

Phone: +886 3 5712 678 Durchwahl 250

Ersatzteile Europa
Spare part

Herr Chanyoung Han
Spare part

Phone: +82 31 371 3023

Herr Colin Wong
Spare part

Phone: +1 669 228-3759

Career

Laura Preinich
Recruiter

Phone: +49 (2407) 9030 0

Sustainability

Rainer Goeckel
CSR Manager

Phone: +49 (0) 2407 9030-1830

Press & Public Relation

Company & Investor Relations

Guido Pickert
Vice President

Phone: +49 (2407) 9030-444

Research & Development

Prof. Dr. Michael Heuken
Vice President

Phone: +49 (2407) 9030-335

Sales

Alan Tai
Taiwan/Singapore

E-Mail senden

Christof Sommerhalter
USA

E-Mail senden

Frank Schulte
Europe

E-Mail senden

Hisatoshi Hagiwara
Japan

E-Mail senden

Nam Kyu Lee
South Korea

E-Mail senden

Wei (William) Song
China

E-Mail senden

Products

Dr. Jens Voigt
Director Product Management

E-Mail senden

Spare parts

Herr Yun Ling
Spare part

E-Mail senden

Herr Satoshi Fujii
Spare part

E-Mail senden

Herr Brian Chuang
Spare part

E-Mail senden

Ersatzteile Europa
Spare part

Herr Chanyoung Han
Spare part

E-Mail senden

Herr Colin Wong
Spare part

E-Mail senden

Career

Laura Preinich
Recruiter

E-Mail senden

Sustainability

Rainer Goeckel
CSR Manager

E-Mail senden

Company & Investor Relations

Guido Pickert
Vice President

E-Mail senden

Research & Development

Prof. Dr. Michael Heuken
Vice President

E-Mail senden

Service

AIXTRON SE (Headquarters)

AIXTRON 24/7 Technical Support Line

AIXTRON Europe

AIXTRON Ltd (UK)

AIXTRON K.K. (Japan)

AIXTRON Korea Co., Ltd.

AIXTRON Taiwan Co., Ltd. (Main Office)

AIXTRON Inc. (USA)

Products

Dr. Jens Voigt
Director Product Management

Career

Laura Preinich
Recruiter

Sustainability

Rainer Goeckel
CSR Manager

Company & Investor Relations

Guido Pickert
Vice President

Research & Development

Prof. Dr. Michael Heuken
Vice President